FA Mitchell supplies an extensive range of interior plywood to our clients in Sydney and across Australia. Our plywood is 100% sourced from local plantations that are guaranteed renewable and certified with zero formaldehyde emission rating.
What is Interior Plywood?
Just as the name suggests, interior grade plywood is most suitable for internal applications in homes and offices. It is your first choice for non-structural indoor applications which need an aesthetic finish. While you will never want it for a garden chair, you can make great use of it for your indoor furniture, inner roof linings, ceilings, interior claddings and walls. The interior plywood can be made with slots and perforations to cater to the Sonapanel range of acoustic plywood.
General Features of Interior Plywood
Unlike exterior plywood which uses Phenol resin, interior plywood uses UF (Urea Formaldehyde) resin which does not counter moisture effectively. This is the reason why interior plywood is prone to water damage. While decorative laminates using melamine or Phenol can increase its water resistance considerably, it is still best suited to interior applications.
While storing and handling interior plywood, make sure that you keep it dry and under cover. The cover should not be tight and must not exhibit condensation.
Other Features and Benefits:
- Our interior plywood offers a clear blemish-free face.
- It is well suited for acoustic panels.
- It can be effectively fire retarded to AS1530.3 and BCA requirements.
- It comes in two sheet sizes: 2400×1200, 2700×1200.
- It is available in these thicknesses: 3mm, 4mm, 6.5mm, 9mm, 12mm, 16mm, 19mm, 25mm, 32mm.
- It has a Zero (EØ) formaldehyde emission rating.
- It is sourced from accredited plantation forests
Our Range Includes
- Hoop Pine AS2270
- White Birch
- Decorative Timber Veneers
- Grooved
- Acoustic (Sonapanel Hoop pine)
- Ariaply (prefinished ceiling and wall plywood)
Your Interior Plywood Supplier in Sydney and NSW
At FA Mitchell, we specialise in hoop pine, an interior grade plywood, which is sourced from accredited plantation forests in Australia. Our quality is impeccable and we take pride in sticking to strict Australian standards. Our lacquer or polyurethane finishes for interior plywood makes it a design feature.
It is a standout product from an aesthetic point of view, whether it be used for a bench-top, a chair or some other furniture. Our in-house contractor ensures that the cutting and preparation is done at our place. This gives us greater control over the end product.
Having been around for 68 years, FA Mitchell has seen quite a few trends in interior plywood. Our regard for quality has remained very strong and our products are audited by the Engineered Wood Products Association of Australasia (EWPAA).
If you buy through some of the other distributors, you can never be too sure about the source of ply. For all you know, it may be manufactured in Indonesia or Bali and distributed via Singapore, reaching other intermediary locations before finally landing in Australia. Such low grade overseas plywood may not offer much in terms of quality. With us, however, you are doubly assured of the high quality of our product.
We supply interior plywood throughout Australia from our Sydney warehouse and wood cutting facility.Use the details below to get in touch with the interior plywood experts at FA Mitchell to ensure you get the right product at the right price.
Get a Quote
For personalised advice and a quote for your project, please call (02) 9646 2777 or fill out the form below, and we will respond to you as soon as possible.
